Thursday 23 May 2013

helical entry

This was requested by some people, although I don't really need it for woodcarving. It's a helix entry into material, with options for angle and diameter. Only for pocket now:


4 comments:

  1. WOW!!! You are really fast :D
    I really can´t wait to have it on the other operations! For roughing this is wonderful. On which operations do you think, you will add this?

    ReplyDelete
    Replies
    1. Well, I don't know where it can be really used. For it to be universal, I think there should be a test if it doesn't reach out from the pocket/area to be milled, which now isn't yet. Also, in 3d milling it could also now potentially mill stuff that is there to stay, so it needs more coding.

      Delete
    2. Well, i will test it for sure on every possible operation :D

      Delete
  2. Normalnya adalah untuk sistem struktur tiang, balok, dan ambang pintu yang menahan beban langsung ke tanah dengan dinding kayu atau bambu yang tidak menahan beban. Secara tradisional, daripada menggunakan paku, sendi duri dan duri serta pasak kayu digunakan.

    Bahan alami – kayu, bambu, ilalang dan serat – merupakan bahan rumah adat. Kayu keras umumnya digunakan untuk tiang pancang dan kombinasi kayu lunak dan keras digunakan untuk dinding atas rumah tanpa beban, https://interiorrumah.web.id dan sering dibuat dari kayu ringan atau ilalang. Bahan ilalang dapat berupa daun kelapa dan aren, alang alang dan jerami padi.

    ReplyDelete

Translate